Cornish Lime CLM35 Fine Lime Putty Mortar & Topcoat Render

Suitable for internal or external use, where the binder strength is appropriate for the host background or surface.

CLM35 Fine Putty Mortar & Topcoat Render is a suitable for general building and pointing work as well as rendering applications. Suitable for topcoat applications over an appropriately prepared undercoat. Various finishing techniques can be implemented depending on the project’s aesthetic requirements. This topcoat is primarily finished as a float coat, although a sponge coat finish is also applicable. Well-suited for stonework or brickwork applications with joints narrower than 10mm.

Explore Cornish Lime CLM66 Superfine Putty Finishing Plaster for superfine traditional finish. Appropriate for various project types, including conservation, renovation, or sustainable construction. Appropriate for various project types, including conservation, renovation, or sustainable construction.

A 20kg tub yields approximately 10 litres of wet lime mortar or render. For rendering, this covers roughly 1m² at a 12.5mm thickness. For brickwork pointing, this will fill roughly 1.2m², for stonework pointing 1m² at 25mm depth or bedding 0.5m².

Consumption rates will change based on the condition of the background and suction. The width and depth of the joint will influence this estimation. On-site trials are advised for the best yield indication for your specific project.

As natural products, our natural sands may exhibit variations in colour, texture, and shape. While these variations are minimal, when colour consistency is crucial, we strongly advise each elevation is completed using material from the same batch.

Supplied in 20kg buckets and palletised for ease of transport, storage, and handling. FIBC tonne bags are also available.

As a traditional non-hydraulic lime putty plaster, Cornerstone Fine Mortar and Render hardens through carbonation, a chemical process in which the plaster absorbs atmospheric CO₂. Seasonal climatic variations significantly influence carbonation; external work with this product is inadvisable between September and early April.

See the Technical Data and Documentation section for detailed product information, application guidance, and datasheets. Always review any available documents before use. Each project is unique, always seek professional advice before undertaking a project.

When working with lime, an alkaline material, always ensure you wear the appropriate PPE. Browse our range of tools and PPE to get started.

Store in indoor covered and dry conditions, protected from environmental conditions, including water, damp or frost and clear from the ground. Always reseal packaging if product is still present.

Do not use in temperatures below 5°C or above 30°C, or if freezing conditions are predicted within the following few weeks, including wind chill. We always advise following best practices for curing and protecting fresh lime renders and plasters. Protect from adverse environmental conditions, including frost, rain, direct sunlight and drying winds.